Super User
Portal milling machine of table type design WP
Portal milling machine of table type design WP
ŠMT portal milling machine of table type design with clamping plate size according to customer‘s request. Table travel is 1m longer than plate length. Table load capacity according to the clamping plate size is 100 - 250 t. Fixed columns with a vertically movable cross rail are connected with a fixed cross beam that reinforces the whole frame of machine. The result is a very high rigidity and accuracy of the complete machine.
Milling and boring heads
Wide range of milling and boring heads enables you machining according to your requirements. More than 30 types of heads are available. Below are the most commonly used. For more information, contact our service department.
ŠMT FC series
ŠMT FC is a milling machine ideal for machining of fabricated structures, castings and other medium-sized components such as parts for transport engineering, mold making, etc. The machine has superior parameters not only in terms of working space but also in machining itself. The compact design of ŠMT FC milling machines ensures maximum performance and allows for efficient machining of medium-sized components.
LINEAR ROLLING GUIDE
ZKUŠEBNÍ TECHNIK - ELEKTRO ZKUŠEBNA
Náplň práce:
- Kontrola, oživování a testování obráběcích strojů v sídle společnosti
- Dohled nad kompletací stroje
- Testování stroje
Požadujeme:
- SŠ - obor elektro
- Obecnou znalost obráběcích strojů, elektrických pohonů a PLC programování (znalost systému Siemens, Fanuc, Heidenhain výhodou)
- Schopnost komunikace v AJ, NJ nebo RJ výhodou
- Organizační schopnosti, samostatnost, vytrvalost, flexibilitu a ochotu učit se novým věcem
- Ochotu cestovat (Evropa, Asie, Amerika)
- Řidičský průkaz sk. B
Nabízíme:
- Práce ve stabilní společnosti s možností osobního růstu
- Odpovídající, motivující mzdové ohodnocení
- Pracovní dobu 37,5 hodiny týdně
- Měsíčně 1200 Kč příspěvek na penzijní / životní pojištění nebo Flexipasy
- 5 týdnů dovolené
- 2 dny zdravotního volna
- Příspěvek na stravování ve firemní jídelně
- Příspěvek na jazykové kurzy
- Příspěvek na dopravu
- Odměny za jubileum / pracovní výročí / pracovní výkony
- Slevy pro zaměstnance u smluvních partnerů
- Nástup možný ihned
OBCHODNÍK - JUNIOR
Náplň práce:
- jednání se zákazníky v ŠMT i u zákazníků
- příprava technicko-komerčních nabídek pro zákazníky
- účast na oborových veletrzích
- spolupráce s dalšími odbornými útvary v ŠMT
Požadujeme:
- SŠ/VŠ vzdělání (technického směru výhodou, ale není podmínkou)
- znalost cizího jazyka AJ/NJ
- znalost dalšího světového jazyka ŠJ/FJ výhodou
- výborné komunikativní schopnosti a prezentační dovednosti
- flexibilita, spolehlivost, zodpovědnost, samostatnost, kreativita, pečlivost
- ochota cestovat
- Znalost práce s PC (Word, Excel, Power Point)
- řidičský průkaz sk. B
- vhodné i pro absolventy
- zkušenosti s obchodní činností výhodou
Nabízíme:
- Práce ve stabilní společnosti s možností osobního růstu
- Odpovídající, motivující mzdové ohodnocení
- Pracovní dobu 37,5 hodiny týdně
- Měsíčně 1200 Kč příspěvek na penzijní / životní pojištění nebo Flexipasy
- 5 týdnů dovolené
- 2 dny zdravotního volna
- Příspěvek na stravování ve firemní jídelně
- Příspěvek na jazykové kurzy
- Příspěvek na dopravu
- Odměny za jubileum / pracovní výročí / pracovní výkony
- Slevy pro zaměstnance u smluvních partnerů
- Nástup možný ihned
Application technologies and engineering
Development of ŠMT machines
The company ŠMT a.s. deals with designing and developing of milling machines with more than a century of tradition. The development is focused on new machines, special machines, operating mechanisms, accessories and other parts of machine. The development activities are running on all levels, as after mechanical, electrical and software side as well.
For the system data management we use the software Teamcenter, thanks which we interconnect processes in the whole company. This system access is applied by departments across the whole company. Thanks this access we flexibly respond to changed controlling and approving processes.
We offer to our customers tailor-made working area, based on their specific needs and requirements. The result is top, quality working area, which corresponds to the latest trends and specific needs every user.
The application engineering
The current trend is supply machines so-called turnkey. We supply to customer machining centres ŠMT, with all accessories and CNC technology. That means complex solution for particular customer application.
Thanks the high expertise of application engineers, the supply include case time studies, tools for machining, tests pieces, CNC programs, debugged postprocessors and simulators. The result is application of whole process by customer, machining of tests piece and training of technical team.
We put emphasis on the satisfaction of customer and with the supply of turnkey machine we enable very fast and effective integration of machine into production process.
Simulation and postprocessors
For making of case and time studies we use the latest CAD/CAM technologies. For technological simulation of designed working areas, we develop Simulator and postprocessors, based on specific needs of every user.
Simulator controlled by CNC program we prepare always on exact machine in required customer configuration. We create virtual machine, on which we can prepare CAM technology and debug CNC programs. Thanks this sophisticated system is possible to realize accurate calculations of times of CNC program and avoid collisions.
We supply this application as add-on to each ŠMT machine. We make our machines virtual too.
Vibradiagnostics
Headstock Vibration Diagnostic (HVD) uses acceleration sensors and natural frequency measurement of respective components. It is used during run-in process, test procedure, machine operation, maintenance and service HDV aslo hepls detect and eliminate defects of bearings and gears, unbalanced rotary parts, damage of gearboxes and low or excessive lubrication. Furthermore, the diagnostic system extends the machine's lifetime and eliminates unpredicted machine breakdown.
With HDV, our customer extends machine monitoring posibilities, stored information for service and maintenance, predictive maintenance during machine lifetime as well as the machine's availability or maximum load limits.
Contacts
Contacts and billing information
General contact
+420 378 136 546
This email address is being protected from spambots. You need JavaScript enabled to view it.
Hot-line
+420 736 755 183
This email address is being protected from spambots. You need JavaScript enabled to view it.
Working hours
Mon - Thurs: 8:00 – 16:00
Fri: 8:00 – 14:00
Billing information
ŠMT a.s.
Tylova 1/57, 301 00Plzeň
Czech Republic
Id. No.: 29253462
VAT No.: CZ29253462
Registration:
Regional Court in Pilsen, section B, riper 1790
Bank account:
Československá obchodní banka, a.s.
Radlická 333/150, Prague 5, 150 57
BIC/SWIFT: CEKOCZPP, Acc.: 8010-0004022223/0300 (CZK)
IBAN: CZ36 0300 1752 8100 0402 2223 (EUR)
IBAN:CZ85 0300 1730 3200 0402 2223 (USD)
Map
Sales contacts
Sales department of ŠMT a.s., Czech Republic
Mr. Otakar Quadrat - sales director
This email address is being protected from spambots. You need JavaScript enabled to view it.
+420 603 196 876
Mr. Ivan Dvorak
This email address is being protected from spambots. You need JavaScript enabled to view it.
+420 603 196 877
Teritories: Lithuania, Latvia, Estonia, Poland, Czech Republic, Ukraine, Bulgaria, Turkey, Iran, Iraq, Georgia, Armenia, Azerbaijan, Uzbekistan, Turkmenistan, Kazakhstan, Vietnam, Indonesia, Myanmar
Mr. Milan Janecek
This email address is being protected from spambots. You need JavaScript enabled to view it.
+420 606 708 486
Teritories: Finland, Norway, Sweden, Denmark, Netherlands, Germany, Switzerland, Austria, Slovenia, Hungary, Romania, Croatia, Serbia, Bosnia-Herzegovina, Montenegro, Kosovo, Albania, North Macedonia, Greece
Mr. Petr Bydzovsky
This email address is being protected from spambots. You need JavaScript enabled to view it.
+420 724 773 038
Teritories: Canada, USA, Mexico, Peru, Chile, Brazilia, Bolivia, Argentina, Spain, Portugal, Great Britain, France, India, Japan, South Korea, Australia
Service department ŠMT a.s., Czech republic
Bc. Jan Rebec - head of dpt.
This email address is being protected from spambots. You need JavaScript enabled to view it.
+420 605 234 835
Jiří Brejcha
This email address is being protected from spambots. You need JavaScript enabled to view it.
+420 731 134 032
ŠMT Sales branches
EASTERN ŠMT (SHENYANG) MACHINE TOOL MODERNIZATION Co., Ltd.
No. 89 Renhe Street, Huishan Economic Development Zone, Shenbei District,
110 013 Shenyang, China
This email address is being protected from spambots. You need JavaScript enabled to view it.
Exlusive sales partners of ŠMT a.s. worldwide
Europe
PROTOSTIM Kft.
Hungary, Romania
This email address is being protected from spambots. You need JavaScript enabled to view it.
http://www.protostim.hu
PECO Werkzeugmaschinen GmbH & Co. KG
Germany (Thüringen, Berlin, Brandenburg, Mecklenburg-Vorpommern, Sachsen-Anhalt, Sachsen, Bayern)
This email address is being protected from spambots. You need JavaScript enabled to view it.
http://www.peco-werkzeugmaschinen.de
Arndt Magnus Werkzeugmaschinen GmbH & Co. KG
Germany (Baden-Württemberg, Bremen, Hamburg, Hessen, Niedersachsen, Nordrhein-Westfalen, Rheinland-Pfalz, Saarland, Schleswig-Holstein)
This email address is being protected from spambots. You need JavaScript enabled to view it.
http://www.magnus-engineering.eu
Mr. Norbert Natshcke
Mariazellerstr. 37
78658 Stetten
Tel: 07403/922655
Mobil: 0152 28643942
www.mtn-wzm.de
email: This email address is being protected from spambots. You need JavaScript enabled to view it.
P.P.Tooltex
Poland
This email address is being protected from spambots. You need JavaScript enabled to view it.
http://www.tooltex.com.pl
Eurola Integral Solution
Spain
This email address is being protected from spambots. You need JavaScript enabled to view it.
http://www.eurola.es
TUROMAK MAKINA Sanayi ve Ticaret Ltd. Şti.
Turkey
This email address is being protected from spambots. You need JavaScript enabled to view it.
http://www.turomak.com
America
Pilsen Imports, Inc.
Ohio, USA
This email address is being protected from spambots. You need JavaScript enabled to view it.
http://www.pilsenimports.com
Máquinas Biasa LTDA
Brazil
This email address is being protected from spambots. You need JavaScript enabled to view it.
www.biasa.com.br
Asia
Batliboi Ltd.
Machine Tool Business Group
India
This email address is being protected from spambots. You need JavaScript enabled to view it.
http://www.batliboi.com
TUROMAK MAKINA Sanayi ve Ticaret Ltd. Şti.
Turkey
This email address is being protected from spambots. You need JavaScript enabled to view it.
http://www.turomak.com
Africa
WD Hearn
South African Republic
This email address is being protected from spambots. You need JavaScript enabled to view it.
http://www.wdhearn.co.za
Australia
ProTUBE Engineering Pty Ltd
South Australia
This email address is being protected from spambots. You need JavaScript enabled to view it.
http://www.protube.com.au
Others contacts
Finance department:
This email address is being protected from spambots. You need JavaScript enabled to view it.
+420 378 133 561
HR department:
This email address is being protected from spambots. You need JavaScript enabled to view it.
+420 378 135 251
Purchasing department:
This email address is being protected from spambots. You need JavaScript enabled to view it.
+420 378 134 829
Customized production:
This email address is being protected from spambots. You need JavaScript enabled to view it.
+420 378 137 727
Following Act 171/2023 Coll., on the protection of whistleblowers and Act 172/2023 Coll., which amends certain laws in connection with the adoption of the Act on the Protection of Whistleblowers, the company establishes as the relevant person:
Hana Černochová
Phone: +420733598627
Email address: This email address is being protected from spambots. You need JavaScript enabled to view it.
Address for delivery: Hana Černochová, relevant person, ŠMT a.s., Tylovická 1/57, 301 00 PLZEŇ-Jižní predměstí. Written submissions can be delivered in person, by post or electronically to the appropriate person or ministry.
Service and overhauling
Service contacts
HOTLINE:
+420 735 799 799
e-mail:
Overhauling
Click here for more information on modernization and overhauling.