Portal Milling Machines Working station
Portal milling machine of Gantry type design WPA

Portal milling machine of Gantry type design WPA
  • Password:

    Large workpieces machining with maximum precision

  • Maximum Parameters:


    POWER  110 kW

    SPINDLE SPEED  4 000 ot/min

    TORQUE 8 400 Nm

    RAM 600 x 600 mm

  • Ikonky

    Energetika Větrné elektrárny Dopravní technika Lodní průmysl Těžba ropy a plynu Letecký průmysl Těžební technika Obecné obrábění
  • Obrázek - ilustrace:

    Obrázek - ilustrace

Portal milling machine of Gantry type design WPA

ŠMT portal milling machine of Gantry type design with variable clamping area in the form of a clamping plates, optionaly equipped with rotary or carousel table. The machine travel is 1m extended for the automatic pick up of milling heads at the end of the workplace. Sliding columns with a vertically movable cross rail are connected with a fxed beam, that reinforces the whole frame of the machine.


A headstock with an extensible ram is movable along the cross rail in the transverse direction. All axis are fully hydrostatic, guideways are covered by telescopic covers.


Portal milling machine  can be equiped with two variants of headstocks

  • SPEED design uses Direct Drive to achieve high working speeds
  • HEAVY design offers a powerful torque design even with with large diameter mills or boring operations


The machine can be equiped with a set of milling heads to widen the machining possibilities of the machine. In the basic version, the milling heads are placed in pallets and equipped with automatic clamping on the ram face. Standard heads are facing and angular, optional NC controlled. Special milling heads can be added upon the request or for special technological operations.
The workstation also includes automatic tool changer - optional robotic tool changer with various magazíne size. Tool cooling is external and through tool.

Clearance between column mm 4000-10000
Clearance under spindle mm 3000-7000
X - axis (gantry) mm N x 2000
X - axis (table) mm  
Y - axis (headstock) mm 5000-11000
Z - axis (ram) mm 2000 2500
W - axis (cross-rail) mm 1000-5000
Power kW 110 103
Torque Nm 3000 8400
Spindle speed rpm 4000 3000
Spindle gear range   1 2
RAM mm 480x480 600x600

Contact Form:

Would you like to ask any question or learn more? Send us a message and we will contact you soon!

Zadejte prosím Vaše jméno a příjmení.

Zadejte prosím platnou adresu společnosti.

Zadejte prosím platnou adresu společnosti.

Zadejte prosím platnou adresu společnosti.

Zadejte prosím Vaše telefonní číslo.

Napište nám prosím Váš dotaz.

Neplatný vstup